MILLIPORE MILLI-RO 60plus 증류수제조장치 판매합니다
상태매우양호
연락처011-354-6248

Aluminium < 0.05 ppm CaCO3
Manganese < 0.05 ppm CaCO3
Free chlorine < 0.3 ppm
Fouling index / silt density index (S.D.I) < 3
Langelier saturation index < + 0.3
pH 4 - 10
The ROPAK pretreatment pack has been developed to operate with a feedwater following the above specifications. Additional pretreatment by
activated carbon prefiltration and / or softener may be necessary when these values are exceeded or as a result of local water characteristics.
Contact Millipore for advice.
Performance
Typical purified water flow rate
Milli-RO 30 PLUS 30 L/Hr*
MILLI-RO 60 PLUS 60 L/Hr*
MILLI-RO 90 PLUS 90 L/Hr*
* At 15° C 10 bar (150 psi) RO membrane pressure and clean RO module.
The initial flow rate may be lower than these values during 2 - 3 weeks while the RO cartridges are new.
Ionic rejection Typical 98 %
Minimum ** 94 %
Rejection Particles > 99 %
Bacteria > 99 %
Organics (> 100 N. Mwt) > 99 %
** Carbon dioxide gas present in the feed water is not rejected by the R.O cartridge. In areas with levels above 10 ppm the % rejection
displayed may be below the real ionic rejection value.