Specifications:

Pump

- Pump type: Serial dual plunger, micro volume (10μL on primary side, 5μL on secondary)

- Flow rate setting range: 0.001 to 5 mL/min (1.0 to 35.0 MPa/145 to 5076psi)

- Flow rate precisions: 0.075% RSD or 0.02min SD, whichever is greater (0.05-2ml/min, 1.0-35.0MPa/145-5076psi, methanol 20°C constant temp)

- LPGE solvent numbers and setting range: Up to 4 solvents; 0 to 100%, 0.1% steps

Sampler

- Injection method: Variable volume injection possible (without sample loss)

- Injection volume setting range: 0.1 to 100μL 

- Injection repeatability: RSD<0.3% (with 10μL injection)

- Carry over: 0.01% (under naphthalene analysis conditions)

- Injection volume accuracy: ± 1 % (50μL, n=6)

Oven

- Type: Block heating/cooling with preheating of the mobile phase

- Temperature control precision: ± 0.1°C

- Temperature control range: (Ambient temperature -15°C) to 60°C

UV Detector 

- Light Source: Deuterium lamp

- Wavelength range: 190 to 600nm

- Bandwidth: 8nm

- Wavelength accuracy: ± 1nm

- Wavelength precision: ± 0.1nm

- Drift: 1 x 10-4 AU/h (250nm air cell)

- Noise level: ± 0.25 x 10-5 AU (for response of 1s, 250nm, air cell)

Operating temperature range:

Power requirements: AC 100V - 240V

Dimensions (W x D x H): 43 x 50 x 60.5 cm

Weight: 52 kg